RSD ‘Gas It’ fuel injection kit
Posted By info On 22/11/2007 @ 04:24 pm In Bodywork | No Comments
[1] 
[2] 
ROLAND Sands Design’s latest new product development is the ‘Gas It’ fuel injection kit. It is a weld-in tank port (measuring 3.75in x 8.0in), which uses the stock H-D EFI components and relocates the fuel pump, regulator and filter to the underside of the fuel tank, allowing the use of almost any custom gas tank.
A vented tank or vented gas cap is required. Weld-in steel manifold, all fasteners, hardware, bill of materials and instructions are included in the kit and further details will be released on the RSD website.
ROLAND SANDS DESIGN
La Palma, California, USA
Tel: 714 228 8481
Fax: 714 228 8468
E-mail: info@rolandsands.com
Article printed from Pro-Street Cycles Blog: http://prostreetblog.com
URL to article: http://prostreetblog.com/2007/11/22/rsd-%e2%80%98gas-it%e2%80%99-fuel-injection-kit/
URLs in this post:
[1] Image: http://prostreetblog.com/__oneclick_uploads/2007/11/221107amd.jpg
[2] Image: http://prostreetblog.com/__oneclick_uploads/2007/11/221107amda.jpg
[3] http://www.rolandsands.com: http://www.rolandsands.com/
Click here to print.