Grandeur Cycle’s ‘Missing Link’

GRANDEUR Cycle says: “At last there is a properly designed and easily installed stabilizer for the FLH and FLT.”

The ‘Missing Link’ stabilizer has been designed to eliminate tank slap, rear steer or high speed wobble problems which are not uncommon on rubber-mounted models, such as Dressers and Road Kings. These issues occur due to the rubber mounted engine, transmission and swingarm moving sideways under heavy compression, such as when cornering at speed.

Grandeur’s ‘Missing Link’ is designed to complement the factory-fitted adjustable stabilizers mounted to the front and top of the engine. It is said to help keep the engine centered in the frame and to prevent the rubber mounts from being compressed and moving side to side by the road forces on the rear tire. With the ‘Missing Link’ fitted, the rubber mounts can only flex up and down, as designed, keeping the driveline centered in the frame.

The entire unit is made in steel, finished with powdercoat and designed to mount above the bottom of the transmission on all models of FLH and FLT 2002 to present.

GRANDEUR CYCLE
Jonesville, North Carolina, USA
Tel: 336 526 2468
Fax: 336 526 4850
E-mail: darius@grandeurcycle.com

www.grandeurcycle.com

This entry was posted on 04/04/2008 at 03:11 pm and is filed under Accessories. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response or trackback from your own site.

| Print